A track record that speaks for itself.

New installations, replacements and major repairs of passenger, freight and panoramic elevators — in Alexandria, Cairo and the North Coast, on OTIS, Schindler, FUJI and XIZI equipment. What you see here is a selected glimpse of a small part of our track record.

Request a quote See the gallery

40+

years of family experience in lifts

selected projects

global brands worked on

119

photos from our sites

A glimpse of our work

Projects delivered by the SENSEI LIFT team

Selected examples of our work — site, scope and specifications as executed. What is here is a small part of our track record.

New installation

OTIS · Xizi Otis

Porto Golf Marina

Location: Alexandria–Matrouh coastal road
Scope: New installation
Site: Leisure chalet resort
Height: 10 typical floors · 33 m shaft
Elevators: Two elevators per building for 40 units
Type: Automatic 2:1 indirect suspension with inverter and emergency device, plus a Gen2 machine-room-less elevator
Load: 650 kg

Repair & renewal

Schindler · Germany

Amreyah Cement Plant

Location: Ghorbaniyat – Old Borg El Arab
Scope: Major repair operation
Site: Cement plant
Height: 75 m tower
Elevators: Two elevators (towers 5 and 6)
Type: Two-speed semi-automatic freight elevator, 2:1 indirect suspension — repaired after the counterweight derailed
Load: 8 tonnes

New installation

OTIS

Marina 5 (Ministers' Point)

Location: Alexandria–Matrouh coastal road
Scope: New installation
Site: Villa compound
Height: 3 floors · 12 m shaft
Elevators: One panoramic elevator
Type: Automatic hydraulic with an external glass shaft
Load: 650 kg · 6 persons

New installation

OTIS

Mevo International Pharmaceuticals

Location: Industrial Zone 1 – New Borg El Arab
Scope: New installation
Site: Pharmaceutical plant
Height: 12 m
Elevators: 3 elevators: an administrative lift with direct suspension plus two 2:1 freight lifts
Type: Automatic
Load: 4 – 10 persons

Repair & renewal

OTIS

Al Madina Al Munawwara Tower

Location: Gamal Abdel Nasser Road – Alexandria
Scope: Replacement & renewal
Site: Residential tower
Height: 14 typical floors
Elevators: Two elevators
Type: Semi-automatic passenger elevator — locally built with an Otis machine and controller
Load: 450 kg · 4 persons

Repair & renewal

OTIS

Al Kayar Tower

Location: Mahattat El Raml – Alexandria
Scope: Machine, ropes, controller and wiring replacement
Site: Residential & commercial tower
Height: 7 typical floors
Elevators: One elevator
Type: Passenger elevator with a wooden cabin and decorative wrought-iron landing doors — heritage kept, technology renewed
Load: 350 kg · 3 persons

National Stevedoring Co. – Dekheila Port

Repair & renewal

Schindler · Germany

National Stevedoring Co. – Dekheila Port

Location: Dekheila Port – Alexandria
Scope: Repair + periodic maintenance contract
Site: Port stevedoring
Height: 55 m tower
Elevators: Two elevators (towers 4 and 5)
Type: Two-speed 2:1 semi-automatic freight — controllers replaced, electromechanical modification and re-roping
Load: 2 tonnes

More work

And more across Cairo and Alexandria

Plus a large number of private elevators and periodic maintenance contracts on various models across both governorates.

OTISMedizen Pharmaceuticals plant

OTISCairo International Airport expansions

SchindlerInternational Medical Center – Ismailia Road

FUJICairo Down Town

FUJIGovernment facilities in the New Administrative Capital

Reference catalogues

Design without limits

Reference samples only. Cabin, ceiling, floor, operating panels and accessories are all tailored to your taste and your building — in any material or character. Even sites that look impossible for a lift, we study and deliver to the highest engineering and global standards. What you'll see here is a small glimpse of what we can do.

Cabin designsSteel, marble, titanium, glass & woodView →

Landing door with a circles-and-flowers laser panel

Door designsLaser panels, steel, glass & woodView →

Ceiling designsLED lighting, mirror, sculpted acrylicView →

Floor designsMarble, granite, PVC, custom metalView →

Operating panelsCar & landing panels with touch screensView →

Additional accessoriesHandrails, mirrors, audio, lighting & sensorsView →

Gallery

From inside our sites

Real photos from installation, repair and hand-over — unretouched. Tap any photo to enlarge it.

Marina 5 — external glass shaft for a hydraulic panoramic lift

Mevo International Pharmaceuticals — New Borg El Arab

Fitting the guide rails inside the shaft

Cabin before finishing — Porto Golf Marina buildings, North Coast

Freight lift repair and upgrade — Amreyah Cement plant

Landing door before the upgrade — Amreyah Cement, Ghorbaniyat

Work platform inside the freight-lift shaft — Amreyah Cement

Inspecting the top of the cement-plant tower

Upgrading the equipment at the tower top — Amreyah Cement

Al Kayar Tower — decorative wrought-iron landing doors

Porto Golf Marina — cabin during fit-out, North Coast

National Stevedoring Co. — Dekheila Port, grain berth

National Stevedoring Co. — Dekheila Port, grain berth — SENSEI engineer on site

National Stevedoring Co. — Dekheila Port, grain berth — the team

National Stevedoring Co. — Dekheila Port, grain berth — the freight lifts

National Stevedoring Co. — Dekheila Port, grain berth — scaffolding and rigging inside the silo tower shaft

National Stevedoring Co. — Dekheila Port, grain berth — repair works inside the tower

National Stevedoring Co. — Dekheila Port, grain berth — working at height with harnesses

National Stevedoring Co. — Dekheila Port, grain berth — securing equipment in the shaft

National Stevedoring Co. — Dekheila Port, grain berth — the SENSEI team on the scaffold

National Stevedoring Co. — Dekheila Port, grain berth — climbing the shaft for inspection

Villa elevator with a semi-automatic landing door and stainless cabin

An old machine room before machine and rope replacement

Traction sheave and ropes during installation

Traction machine and ropes in the machine room

Machine room of a Mevo Pharmaceuticals elevator — Borg El Arab industrial zone

Supply and installation contract in the New Administrative Capital with Maj. Gen. Ahmed Zaki Abdeen, chairman of the New Administrative Capital company

Outdoor home lift with a glass shaft on the garden side

Glass home lift inside the villa after installation

Home-lift structure during installation inside the house

Panoramic lift with a black frame after installation

Exterior panoramic lift on a villa façade

Home-lift structure in the workshop before shipping

Glass lift with a gold frame in a villa hall

Gold glass cabin beside the wrought-iron staircase

Steel shaft during installation — seen from below

Home lift with a gold frame beside a marble staircase

Wrapped landing door at the shaft opening before installation

Rooftop machine-room structure before cladding

Preparing the rooftop machine-room structure

Fixing the rails to the shaft wall — work begins

Fixing the guide rails to the shaft wall

A SENSEI technician working in the open shaft

Site preparation before the lift installation

Installation works in the building corridor

The team preparing the landing-door opening

The door opening after the frame is fitted

Landing-door frame — seen from the corridor

The traction machine on the machine-room beams

Controller and traction machine in the machine room

Control cabinet — control board and transformer

Control cabinet — terminals and contactors

Complete control cabinet after installation

A FUJI Precision escalator wrapped in the factory before shipping

FUJI Precision escalator truss ready for delivery

A batch of escalators in the shipping yard before delivery

Shaft-less home-lift structure before cladding

Home lift integrated into the living space

Home lift with a white cabin beside the doorway

Scaffolding inside the shaft before installation

The traction machine in the machine room

Lift rails in the stairwell — seen from above

Landing-door sill during installation in the shaft

Glass lift inside a spiral staircase — from above

Machine-room-less lift machine at the shaft top

The MRL traction unit mounted on the rails

Steel shaft structure inside the stairwell

Steel shaft structure in an existing building

Safety net inside the shaft during installation

Glass lift with an aluminium frame after installation

Rails and travelling cables inside the shaft

Landing door with a yellow frame for a panoramic lift

Glass shaft with a yellow frame beside the stairs

The traction motor after installation in the machine room

Shaft with scaffolding before installation

The SENSEI team moving a gold door in the factory

Heritage

Experience that began before the company

SENSEI GROUP was founded by Eng. Magdy Abdel Fattah Moussa — may God rest his soul — holder of a certificate of appreciation from the director of Otis Middle East and the general manager of Otis Egypt for his excellence in 1989.

He personally supervised the moving-walkway and escalator works of the Holy Mosque expansions in Makkah, upgrades of several airports in Saudi Arabia and the military airports of Egypt, and received letters of appreciation from major elevator manufacturers for his safety and technical guidance.

”
From the Holy Mosque expansions to a residential tower in Alexandria — the same precision.
SENSEI LIFT

Original photos of the certificate and the ceremony will be added soon.

Have an elevator project?

Send us your building details and our team will come back with a study and the right offer.

Request a quote

Write to us directly

Leave your name, a way to reach you and your message — we reply within one business day.